Blade 400 3D RTF RC Electric Helicopter
Product Description
Description:
-The Precision Main Blade Grips and Mixing Arms are designed to work on the new Blade CP PRO helicopters. The product is 100% aluminum CNC machined to provide best precision and durability. With total of 10 miniature ball bearings, this combination works flawlessly on the blade CP PRO head, and brings much better smoothness in the head response. The mixing arms are redesigned to equip with high precision bearings in each arm… More >>
The Blade 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. There is nothing left to assemble or set up.
This is my “B-Rex 400″. My good friend named it that because I put a lot of T-Rex 450 parts on it. Here are the specs: Align 430L 3550kv motor 11T pinion Castle Creations 35A ESC copterx 450 sev2 head Sonix CNC tail HS-65MG servos Hi-tec HG5000 gyro HSG-5083MG tail servo Thunder Power 325 CF blades Zippy Flight Max 3S1P 2200mah 25C battery Spektrum ar6100e receiver T-Rex 450 canopy for more battery room This video was shot on the second day I tried inverted hovering. I had about one hour of total time practicing this on the flight simulator before attempting it real world. Nose-in inverted was the easiest orientation for me. I’ll work on tail-in once I get consistent with nose-in.
Training flights of the Blade 400 3D RTF helicopter. Not much to see, but it is very stable. The Heli itself is nowhere near the quality of a Trex but then again a TREX needs all the extra bits to complete plus a lot of knowledge and time to assemble. Also it works out that even a basic TREX will cost double what one of these does. The Frame of the Heli is a little too plastic and a one piece affair but apears to be of reasonable quality. We have three of these flying at our club and the owners seem happy enough, especially when set up by our heli Guru. The E-Flite Blade 400 3D is designed to give intermediate to advanced RC helicopter pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. There is nothing left to assemble or set up. The E-Flite Blade 400 3D radio control helicopter is ready for hovering and 3D aerobatics as soon as you finish charging the battery. And you can fly it just about anywhere, anytime thanks to the included Spektrum 2.4ghz dx6i radio system that avoids interference with other RC users, even those on other 2.4ghz systems.
2nd flight with the Blade 400- still in one piece!!!
Product Description
This is a pair of Plasti-Blades from JCS Hobbies for the / Blade 400, TREX 450 and the Heli-Max MX450 (HMXE0210). / / FEATURES: Constructed of high impact plastic / Black in color / Extremely crash resistant / Flat bottom airfoil / / INCLUDES: Two Plasti-Blades Helicopter Blades for 400 size electric helicopters / / REQUIRES: Installing on rotor head with stock hardware from helicopter / / SPECS: Length: 12.8″” (325mm) / Width: 1.25″” (32mm) / Thicknes… More >>
gy401 jr ds285 all round castle pheonix ice 50 carbon fibre blades hpi main rotor bearings-cnc. toss the stock servos get new speed controller and new gyro and battery and charger thunder power flight power batt.
Training Day! Larry shows how it's done with the E-Flite Blade 400
Product Description
Description:
-The new CNC aluminum washout base offers many improved features to minimize all slop in main shaft area. The washout base is produced at extreme tolerance of +/- 0.001mm to ensure super fit and zero slop in the main shaft. The washout base is compatible with Blade 400 stock or aluminum upgrade washout levers.
Includes:
-1 CNC Washout base
-1 CNC Brass Sleeve
